Switch selectable charging current - 200mA and 600mA.
Switch selectable finishing voltage (4.35v for LiHV, 4.2v for standard LiPo).
Can be powered by a power supply with a 2.5mm DC barrel connector or via XT60.
A digital screen displays status information.
This charger is small enough to fit in the slot provided in the multi-whoop carry case.
THE IMPORTANT STUFF
Dimensions: 80 x 60 x 15mm
Charge port output: Selectable 200mA and 600mA, Max charge power: 2.5W
4.20V cell charging cutoff for Lipo battery (+- 0.5% margin of error)
4.35V cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)
Input Voltage: 6-20V
Input power: 6 - 24v DC (12V/3A Adapter recommended) or 2S - 6S LiPo over XT60.
Blue Flashing slowly: 4.20V selected
Blue Flashing rapidly: 4.35V selected
Blue Solid: Battery Charging
Blue turn Flashing from Solid: Full Charged
INP/xxV: Input voltage
CH1.....CH6/xxV: Inserted battery voltage
USB/xxV: USB output voltage
1 * 1S LiPo LiHV Charger Board
4 * JST-PH 2.0 Male to JST and Micro LosiFemale Cables
A soft padded underside protects you and the charger from shorts - however, always check for damage and be smart about the surfaces on which you place this charger when it is powered on.